How to open the lock with a master key.

[DronVR]

How to open the lock with a master key.

Unlike a hacking, often the door master keys do not damage the lock, making it possible to use it later, opening it with a native key. The manipulation of the autopsy always impressed people watching this process from the outside. However, it doesn’t even occur to many that this spectacular case may turn out to be more affordable, you just have to show patience and skill.

What is necessary for a successful master key?
Everyone can learn to work with a master key against weakly protected locking devices. For this, some special skills are not required, but to go through the “locks” of classes 3 and 4 of protection is real skill. To open well-protected locks with a master key, it’s not enough to have the right tool on hand, you need to have the necessary set of skills and abilities that need to be constantly honed.

• Need to master the mechanical skills. Simply put, you need to learn how to control your hands, because in many respects the final result depends on their dexterity. You need to train your fingers and hands so that they can make the necessary efforts, being in a different position (even very uncomfortable). In addition, it is necessary to coordinate the efforts of the hands with hearing and sensitivity almost like when playing the flute or piano.
• You need to have a good imagination. They say that imagination is not only given by nature, it can and should be developed. However, if there are no natural inclinations, you can develop in this direction, but you will not achieve success.

You need to develop your imagination in a reconstructive direction, in other words you need to imagine the internal structure of the castle, imagining how the master key enters it and alternately shifts the elements of the secret.

• If it is possible to ensure that the imaginary picture matches the actual behavior of the castle when exposed to a master key, then consider that the goal has been achieved.
• You need to learn how to analyze the information received. During "tactile" and auditory contact with the lock, you get enough information to open it without any problems. The problem is that a beginner cannot process this information correctly, and in the worst case, is not at all able to receive it due to his modest abilities and inclinations. Only practice will help to solve the problem, the more locks are opened, the more in-depth analysis you can do.

We make a set of master keys with our own hands

Acquiring master keys in an online store is quite expensive. Plus, in the sets of factory master keys, there is not always all the necessary tools, not to mention its quality. Therefore, we initially do not look for easy ways, trying to make the necessary master keys ourselves. To make your first master keys we need:

1. emery;
2. a set of files and files (which will have to be spoiled);
3. screwdriwer set;
4. vice and pliers;
5. a hammer;
6. and most importantly brains and straight arms.

In addition to this list, you will need more templates for the manufacture of various master keys. But they can be quite easily found on the Internet, so we will not talk about them in detail. Now we need to take a set of files and files and turn it into a set of master keys, modifying their sharp metal handles. The fact is that files and files are made of durable tool steel, which means that the master keys will be strong and withstand significant loads.

• To begin, we’ll make hook-shaped master keys. Referring to the configuration of the rod in accordance with the template, we process the tip of the needle file handle, giving it the desired shape. Then, very gently holding the file in a vise, bend it with pliers at the right angle. We do the same with other hook-shaped locking devices, you get three of them.
• Now we will make a master key with a clove at the end, designed to raise the pins of a cylinder lock. To do this, find the template of the corresponding master key and determine the size of the tooth. Then on the emery, grind the thick part of the handle of the needle file, leaving the part similar to a tooth. Now we clamp our workpiece in a vice and process it with a file to give the tooth the desired shape, not forgetting to sharpen sharp edges.
• Next, we make a master key comb. We take the files and grind several grooves on its handle with the help of the second file, so that we get the teeth. With the sizes the template will help us.

Important! The size and fit of the teeth is often quite difficult to implement on the workpiece, using only a file and a ruler, so get ready for the fact that you have to spoil a single master key before you get something worthwhile.
In addition to the above set of master keys, we need a good tensioner and collar. The tensioner can quite easily be made from a curved hex key, the edges of which need to be turned on an emery. We will make the coagulation from a screwdriver with a rod of suitable thickness, bending it with a hammer at the right angle.

Basics of tapping a lock cylinder lock pick

opening the cylinder lock​

To open the cylinder lock, we need a tensioner and a master key with a clove at the end. First, we insert the tensioner into the keyhole and try to turn the larva towards the opening, creating tension. Then we introduce a master key with a tooth into the lock and try to catch the first pin. The lock responds to our every action with light clicks, so listen carefully and react correctly.

Our first task, without removing the voltage from the cylinder, is to hook the first pin, giving it a position corresponding to the opening. As soon as this succeeds, the cylinder will move a bit, then the next pin is next in line, and so on until the lock opens. Quite rarely, after the first search for pins, it is possible to open the lock, so after passing a series of secret elements once, do not hesitate to try again. From the second time it will certainly work out.

Remember! When manipulating a master key in a cylinder, you need to be extremely careful, because the larva inside is quite fragile.

We open the lever lock with a master key
When opening the lock with a master key, it is also very important to feel the secret mechanism with your fingers. After all, you can’t look inside, and you need to lift the heavy plates correctly, while leaving the bolt in tension. All this requires a fair amount of training. But if there is a desire to learn, then why not?

For the manipulation of the leveling we need a tensioner made of a flat-blade screwdriver bent at a right angle and a hook-shaped master key of suitable size. It’s better to grind the pick hook’s tip first, and spray WD-40 liquid into the keyhole of the locking device we are interested in. It will facilitate the movement of the plates.

We introduce the screwdriver-tensioner into the keyhole to the end and turn it towards the opening of the lock. Holding the bolt in tension, insert the hook-shaped master key and begin to catch the first plate. As soon as we succeed, we raise it, while trying to make the turn a roll. Next, we catch the second plate, then the third and so on until the lock opens.

In conclusion, we note that every good owner should know the basics of the manipulation of opening locking devices. Well, lock picks for locks can be made with your own hands. To become a highly qualified specialist in this field, you need interest, dedication and years of training. But in order to find a way out of the life situation associated with the castle in most cases it is enough to know the basics!

Source @deepweb